ulc

  • Collets are interchangeable for a given arbor size.
  • Accuracy of arbor is not affected by indexing of collet on arbor body
  • Pull-down action throughout gripping range of collet.
  • High-alloy special steel, heat treated to provide maximum service life.
  • Precision machined flats provide long-term accuracy and torque transmission.
  • Collet can be designed to locate on major diameter or pitch diameter of spline.
  • Sealing of collet slots is available at extra cost, on request.

 

For use on ULC-7100-A & ULC-8100 Arbors
Range Collet No.
.500-.510 ULC-7101
.511-.520 7102
.521-.531 7103
.532-.541 7104
.542-.552 7105
.553-.562 7106
.563-.572 7107
.573-.582 7108
.583-.592 7109
.593-.603 7110
.604-.613 7111
.614-.624 7112
.625-.634 7113
.635-.645 7114
.646-.655 7115
Length-.59
For use on ULC-7200-A & ULC 8200 Arbors
Range Collet No.
.593-.603 ULC-7201
.604-.613 7202
.614-.624 7203
.625-.634 7204
.635-.645 7205
.646-.655 7206
.656-.666 7207
.667-.676 7208
.677-.687 7209
.688-.697 7210
.698-.707 7211
.708-.717 7212
.718-.727 7213
.728-.737 7214
.738-.747 7215
.748-.757 7216
.758-.767 7217
.768-.777 7218
.778-.787 7219
.788-.797 7220
Length-.72
For use on ULC-7300-A & ULC-8300 Arbors
Range Collet No.
.718-.727 ULC- 7301
.728-.737 7302
.738-.747 7303
.748-.757 7304
.758-.767 7305
.768-.777 7306
.778-.787 7307
.788-.797 7308
.797-.807 7309
.808-.817 7310
.818-.827 7311
.828-.837 7312
.838-.847 7313
.848-.856 7314
.857-.866 7315
.867-.874 7316
.875-.884 7317
.885-.895 7318
.896-.905 7319
.906-.916 7320
.917-.926 7321
.927-.937 7322
.938-.947 7323
.948-.958 7324
.959-.968 7325
.969-.979 7326
.980-.989 7327
.990-1.00 7328
Length-.84
For use on ULC-7400-A & ULC-8400 Arbors
Range Collet No.
.875-.895 ULC 7401
.896-.916 7402
.917-.937 7403
.938-.958 7404
.959-.979 7405
.980-1.00 7406
1.001-1.021 7407
1.022-1.042 7408
1.043-1.063 7409
1.064-1.084 7410
1.085-1.104 7411
1.105-1.124 7412
1.125-1.146 7413
1.147-1.168 7414
1.169-1.190 7415
1.191-1.212 7416
1.213-1.234 7417
1.235-1.256 7418
1.257-1.278 7419
1.279-1.299 7420
Length-.94
For use on ULC-7500-A & ULC-8500 Arbors
Range Collet No.
1.125-1.146 ULC-7501
1.147-1.168 7502
1.169-1.190 7503
1.191-1.212 7504
1.213-1.234 7505
1.235-1.256 7506
1.257-1.278 7507
1.279-1.299 7508
1.300-1.320 7509
1.321-1.341 7510
1.342-1.362 7511
1.363-1.383 7512
1.384-1.404 7513
1.405-1.425 7514
1.426-1.446 7515
1.447-1.467 7516
1.468-1.489 7517
1.490-1.511 7518
1.512-1.533 7519
1.534-1.555 7520
1.556-1.575 7521
1.578-1.599 7522
1.600-1.621 7523
1.622-1.642 7524
Length-1.125
For use on ULC-7600-A & ULC-8600 Arbors
Range Collet No.
1.468-1.489 ULC-7601
1.490-1.511 7602
1.512-1.533 7603
1.534-1.555 7604
1.556-1.577 7605
1.578-1.599 7606
1.600-1.621 7607
1.622-1.642 7608
1.643-1.663 7609
1.664-1.684 7610
1.685-1.705 7611
1.706-1.726 7612
1.727-1.747 7613
1.748-1.768 7614
1.769-1.789 7615
1.790-1.810 7616
1.811-1.831 7617
1.832-1.852 7618
1.853-1.873 7619
1.874-1.894 7620
1.895-1.915 7621
1.916-1.936 7622
1.937-1.957 7623
1.958-1.978 7624
1.979-1.999 7625
2.000-2.020 7626
2.021-2.041 7627
2.042-2.062 7628
2.063-2.083 7629
2.084-2.104 7630
Length-1.22
For use on ULC-7700-A & ULC-8700 Arbors
Range Collet No.
1.937-1.957 ULC-7701
1.958-1.978 7702
1.979-1.999 7703
2.000-2.020 7704
2.021-2.041 7705
2.042-2.062 7706
2.063-2.083 7707
2.084-2.104 7708
2.105-2.125 7709
2.126-2.146 7710
2.147-2.167 7711
2.168-2.188 7712
2.189-2.209 7713
2.210-2.230 7714
2.231-2.251 7715
2.252-2.272 7716
2.273-2.293 7717
2.294-2.314 7718
2.315-2.335 7719
2.336-2.356 7720
2.357-2.377 7721
2.378-2.398 7722
2.399-2.419 7723
2.420-2.440 7724
2.441-2.461 7725
2.462-2.481 7726
2.482-2.501 7727
2.502-2.521 7728
2.522-2.541 7729
2.542-2.561 7730
2.562-2.583 7731
2.584-2.604 7732
2.605-2.625 7733
2.626-2.646 7734
2.647-2.667 7735
2.668-2.689 7736
2.690-2.711 7737
2.712-2.733 7738
2.734-2.755 7739
2.756-2.777 7740
2.778-2.799 7741
2.800-2.821 7742
Length-1.31

*Collets ULC-7110 through 7115, ULV-7213 through 7220 and ULC-7317 through 7328 should be used only for light turning or grinding operations.